I&C Designer

Remote
Full Time
Nuclear
Experienced
iParametrics is seeking Instrumentation and I&C Designers for a significant Department of Energy nuclear project. The I&C Designers will be responsible to read, interpret and generate design drawings and 3D modeling with minimal input from the engineering staff. Must have the ability to walk down field systems with minimal guidance, interpret field direction, generate minor design details, create new drawings, modify existing drawings, and direct junior drafters.


Responsibilities: 
  • Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements. Develop and review specifications and design criteria
  • Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity
  • Coordinate technical issues with other disciplines, project management, vendors and clients
  • Execute work in compliance with Project Quality Plan and procedures
  • Execute work in accordance with the approved project scope, cost and schedule baselines
  • Establish, control and report on material key quantities; provide analysis and forecasts
  • Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals
  • Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes
  • Other duties as assigned

Required Education and Experience:
  • Must have a minimum of a bachelor's degree in engineering, design or another field related to the position from an accredited university.
  • Must have a minimum of 10 years of progressive experience in design and drafting related to engineering and construction.
  • Must be able to Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, PLC, DCS, network configuration, logic development, network switches, process controls, P&ID development support and review, HMI, communication protocols, routing, and layout, SIL, and procurement activities 
  • CAD proficiency with demonstrated experience with computer aided drafting applications to originate and produce drawings with minimum supervision.                                            
  • Background and experience must include drafting/designer experience in instrumentation and control systems within the electrical field.  This may include cable trays, conduits, electrical panels, instrument locations, safety systems, and alarm systems. 
  • The Department of Energy requires US citizenship to be authorized to work on this project.
Preferred Experience:
  • Professional Engineer license
  • Practical field experience
  • EPC project experience for the following industries:
    • U.S Department of Energy or other U.S. Federal Government Agency
    • Nuclear facilities under a nuclear quality assurance program
    • Manufacturing, pharmaceutical or biotechnology
  • Proficiency with Bentley MicroStation
  • Proficiency with Autodesk AutoCAD
  • Proficiency with Intergraph SmartPlant Instrumentation (SPI)
  • Intermediate knowledge of:
    • Specifying instrumentation
    • Control systems procurement activities
    • Piping and Instrumentation Diagram (P&ID) representation; can recognize/report 
    • problems associated with control systems representation on P&ID
    • Developing control strategies and represent on P&ID
    • Instrument design and installation requirements
Benefits & Compensation:
As a W2 employee of iParametrics, team members are eligible for benefits such as medical, dental and vision, and the company matching 401K plan, subject to plan terms and applicable waiting periods. Compensation for this position is hourly ($56-79) based on experience, background, and skills.

About the Company:
Founded in 2003, iParametrics is a recognized leader in emergency management, homeland security, cost estimating and data analytics for federal, state, and local clients, including the Department of Homeland Security (DHS), the Federal Emergency Management Agency (FEMA), the Department of Energy (DOE), the Department of Defense (DOD), and all 50 States. Please visit us at www.iparametrics.com for more information.

iParametrics is an Equal Opportunity Employer. We are committed to a work environment that supports and respects all individuals without discrimination on the basis of race, color, religion, national origin, age, sex, pregnancy, marital status, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This job description is intended to outline the general nature and level of work that would be performed by project team members. It is not designed to cover or contain a comprehensive list of all responsibilities, duties, or skills required for this job. This description is subject to change at the discretion of the company, with or without notice.

 
Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*